Main Machines

SINGHASINI Double Drive Pulverisers are impact type, high speed, air swept, swing hammer type, multipurpose grinding mills having separate drive for the centrifugal blower of the pulveriser, capable of grinding soft to medium hard minerals & chemicals up to the hardness of 5.0 Moh’s to achieve particle size up to 500/600 Mesh or 18/20 Microns.

SINGHASINI Ultrafine Pulverisers are impact type, high speed, air swept, swing hammer type, multipurpose grinding mills coupled with a separate centrifugal blower, capable of grinding soft & medium hard minerals & chemicals upto the hardness of 5.0 Mohs to achieve particle size up to 1000 Mesh / 10 Microns. The main mill is supplied with

SINGHASINI 3 – ROLLER MILL with integral separator provide an automatic comparatively dust free complete system for medium to fine grinding and classification of Sulphur. The grinding operation in Singhasini 3 Roller Mill is performed on the principle of attrition and compression, which results due to the centrifugal force generated from the suspended Rollers running

SINGHASINI Spices Grinding Mills are swing beater type of multi row of well balanced hammers mounted on heavy duty steel disks. All the wearing parts of the Grinding chamber and blower are protected with replaceable lining plates. The bottom of the Grinding Chamber is supplied with a replaceable screen for required output size. The feed

SINGHASINI Ultrafine Pulverisers are impact type, high speed, air swept, swing hammer type, multipurpose grinding mills coupled with a separate centrifugal blower, capable of grinding soft & medium hard minerals & chemicals upto the hardness of 5.0 Mohs to achieve particle size up to 1000 Mesh / 10 Microns. The main mill is supplied with

This is a special type of centrifugal type of classifier, consisting of double row of whizzer blades / rotor fitted on the main shaft. The feed material enters the classifier gets suspended in air through a vertical pipe positioned at the bottom of the classifier. The initial classification takes place in the classifying chamber.  After

SINGHASINI Flash Drying System in its simplest form of mechanical design, is merely a Hot Air Conveyor into which solids, if reasonably free flowing, may be dropped. The material then gets dispersed thus exposing maximum surface to the drying process. This leads to a very rapid drying rate and the time required is in seconds

SINGHASINI Hammer Mills are swing beater type of multi row of well balanced hammers mounted on heavy duty steel disks. All the wearing parts of the Grinding chamber are protected with replaceable lining plates. The bottom of the Grinding Chamber is supplied with a replaceable screen for required output size. The feed end of the

SINGHASINI Screw Conveyor consists of helicoids or a sectional flight mounted on a pipe or shaft which rotates in a trough. The design of flights, its pitch and the RPM may be altered to suit variety of applications.