SINGHASINI Ultrafine Pulverisers are impact type, high speed, air swept, swing hammer type, multipurpose grinding mills coupled with a separate centrifugal blower, capable of grinding soft & medium hard minerals & chemicals upto the hardness of 5.0 Mohs to achieve particle size up to 1000 Mesh / 10 Microns. The main mill is supplied with
SINGHASINI 3 – ROLLER MILL with integral separator provide an automatic comparatively dust free complete system for medium to fine grinding and classification of Sulphur. The grinding operation in Singhasini 3 Roller Mill is performed on the principle of attrition and compression, which results due to the centrifugal force generated from the suspended Rollers running
SINGHASINI Spices Grinding Mills are swing beater type of multi row of well balanced hammers mounted on heavy duty steel disks. All the wearing parts of the Grinding chamber and blower are protected with replaceable lining plates. The bottom of the Grinding Chamber is supplied with a replaceable screen for required output size. The feed
SINGHASINI Ultrafine Pulverisers are impact type, high speed, air swept, swing hammer type, multipurpose grinding mills coupled with a separate centrifugal blower, capable of grinding soft & medium hard minerals & chemicals upto the hardness of 5.0 Mohs to achieve particle size up to 1000 Mesh / 10 Microns. The main mill is supplied with
This is a special type of centrifugal type of classifier, consisting of double row of whizzer blades / rotor fitted on the main shaft. The feed material enters the classifier gets suspended in air through a vertical pipe positioned at the bottom of the classifier. The initial classification takes place in the classifying chamber. After
SINGHASINI Flash Drying System in its simplest form of mechanical design, is merely a Hot Air Conveyor into which solids, if reasonably free flowing, may be dropped. The material then gets dispersed thus exposing maximum surface to the drying process. This leads to a very rapid drying rate and the time required is in seconds
SINGHASINI Hammer Mills are swing beater type of multi row of well balanced hammers mounted on heavy duty steel disks. All the wearing parts of the Grinding chamber are protected with replaceable lining plates. The bottom of the Grinding Chamber is supplied with a replaceable screen for required output size. The feed end of the
SINGHASINI Screw Conveyor consists of helicoids or a sectional flight mounted on a pipe or shaft which rotates in a trough. The design of flights, its pitch and the RPM may be altered to suit variety of applications.
SINGHASINI Bucket Elevators are the simplest and most dependable units for making vertical lifts. They are available in a wide range of capacities and may operate entirely in the open or be totally enclosed.
SINGHASINI Rotary feeders / Airlock Valves are used at the bottom of Bins, Cyclones, Dust Collectors or Feed Hoppers to discharge materials at a controlled rate or act as an Airlock. They are also used to introduce materials into positive or negative conveying systems. A Rotary Feeder / Airlock Valve consists of a rotor which
July 31, 2011 
admin